台灣也事達國際有限公司

Without drying also without UV不須經UV也無須再烘乾/更無須防霉片。

效益分析

採用自動噴霧機械不須手動,免除不均勻以及遺漏噴霧的缺失。
除鞋底以外外部都可以有效噴到防霉劑、效益。
防霉效果100%。長期有效視儲存及作業流程。
安裝在成型現場的流水線上，可以因作業關卡而輕易移動位置。
噴完無須再經過烘箱也無須經過UV箱、節能。
水性液體無須冗雜清洗。
薪資效益, 霧狀噴塗,最省錢。
完全自動控制，鞋子入內自動開閥作業。
噴完YS-1606自然晾風過後可以直接包裝。
已經發霉的成品,皆可以以YS-1606除霉，所有材料皆可以有效除霉。

A shoes factory use the mold-proof agent which is made of Allyl isothiocyanate, ultraviolet disinfection box, put into two pieces anti-mold stickers and coat Allyl isothiocyanate on the shoes box andcoat Allyl isothiocyanate on the outside box again. It still can’t avoid shoes get mold after arrive in the United States

某廠使用有毒性的异硫氰酸烯丙酯防霉剂，經紫外線消毒盒，再放入两三片防霉片贴片烯丙基异硫氰酸酯在鞋盒內部然後在外部再次涂上异硫氰酸烯丙酯。但是仍然不能避免產生黴菌抵達外國!

Use YS-1606 water based mold-proof agent to replace the lower effectiveness mold-proof sticker and Allyl isothiocyanate. The labors cost will be reduced and give workers a more comfortable working environment.

使用YS-1606水性防霉劑，以取代低效益的防黴異硫氰酸烯丙酯貼紙(防霉片貼紙)。勞動者將減少成本，並給工人一個更舒適的工作環境。

After plying the cloth together, mold grows inside the cloth. Because It is glued with white latex, natural ingredients which is easily to get mold.
Once mold grows, the marks can’t be cleaned easily, causing the materials to be scrapped. Our recommendation is putting 5%YS1606-1 into the white latex before plying the cloth together.

有使用白膠(Latex)貼合的材料,是天然成分富含水分容易滋長黴菌,貼合之後黴菌容易在布里層內部生長,一旦發霉不易清除,將導致產品報廢.我們建議在白膠中添加5%YS-1606，才能放心合貼。

Non-moldy condition: Spraying YS-1606 water based mold-proof agent on the product surface and let it drying naturally.

如何不產生發霉：使用YS-1606水性防霉劑防黴直接噴塗於產品表面上，並讓其自然乾燥。

全自動化噴頭使產品無死角

Moldy condition: Use the YS-1606 Remove any mold with a dry brush, Dry cloth wipe dry, then spraying YS-1606 on the product surface and let it drying naturally.

除霉方式：用乾淨刷子以YS-1606清除有發霉的部位，乾布擦拭待乾,然後在表面上再噴塗YS-1606產品，待自然乾燥。